Contrast ratio of Gateway FPD2485W

Contrast ratio 1066:1 (edge: 1280:1)
Monitor model Gateway FPD2485W
Submitted 28 Jun 2014 02:40 CEST, by 93.105.*.*
Camera model Nikon D7000
Processing remarks

Note: image file 1: suggested exposure time: 2.4 s (Set EV to +1.2)
Note: image file 3: suggested exposure time: 2.8 s (Set EV to +1.5)

Black
Screen photo
Luminance 0.25 cd/m2
Luminance spread 0.07 cd/m2 (2 standard deviations)
Exposure value –3.73 stops   (aim for –2 to –3)
Exposure spread 0.38 stops
Area used for calculation 0.582 x 0.659
Camera settings Exposure time: 1   ISO: 200   F-number: 2.8
Focal length: 42 mm   (35 mm equivalent)
Exposure compensation: 0
White
Screen photo
Luminance 268 cd/m2
Luminance spread 26 cd/m2 (2 standard deviations)
Exposure value –2.32 stops   (aim for –2 to –3)
Exposure spread 0.14 stops
Area used for calculation 0.582 x 0.659
Camera settings Exposure time: 1/400   ISO: 200   F-number: 2.8
Focal length: 42 mm   (35 mm equivalent)
Exposure compensation: 0
Black at screen edge
Screen photo
Luminance 0.21 cd/m2
Luminance spread 0.08 cd/m2 (2 standard deviations)
Exposure value –4 stops   (aim for –2 to –3)
Exposure spread 0.55 stops
Area used for calculation 0.582 x 0.659
Camera settings Exposure time: 1   ISO: 200   F-number: 2.8
Focal length: 42 mm   (35 mm equivalent)
Exposure compensation: 0
{adcode}

The luminance values in cd/m2 are not very reliable, since camera sensitivities can easily differ up to 50% from their nominal value. Typically, the real luminance is 30% lower than this number. The area used for calculation is chosen such that it corresponds to a viewing angle of ±14° horizontally and ±10.5° vertically, which is equivalent to viewing the screen from a distance of about 1.5 times the diagonal size.

Unfortunately, there is a lot of variation in how cameras use EXIF settings. If photos from your camera your produce unusable results, try coming back in a few days. I review submitted pictures regularly and try to fix problems.