Contrast ratio of Qnix QX2710

Contrast ratio 1553:1
Monitor model Qnix QX2710
Submitted 18 May 2014 14:41 CEST, by 62.163.*.*
Camera model Nikon D3100
Processing remarks

Note: image file 1: suggested exposure time: 1.6 s (Set EV to +1.5)

Black
Screen photo
Luminance 0.28 cd/m2
Luminance spread 0.3 cd/m2 (2 standard deviations)
Exposure value –3.95 stops   (aim for –2 to –3)
Exposure spread 1.67 stops
Area used for calculation 0.375 x 0.422
Camera settings Exposure time: 0.6   ISO: 400   F-number: 3.5
Focal length: 27 mm   (35 mm equivalent)
Exposure compensation: 0
White
Screen photo
Luminance 438 cd/m2
Luminance spread 80 cd/m2 (2 standard deviations)
Exposure value –1.58 stops   (aim for –2 to –3)
Exposure spread 0.26 stops
Area used for calculation 0.375 x 0.422
Camera settings Exposure time: 1/500   ISO: 400   F-number: 3.5
Focal length: 27 mm   (35 mm equivalent)
Exposure compensation: -1

The luminance values in cd/m2 are not very reliable, since camera sensitivities can easily differ up to 50% from their nominal value. Typically, the real luminance is 30% lower than this number. The area used for calculation is chosen such that it corresponds to a viewing angle of ±14° horizontally and ±10.5° vertically, which is equivalent to viewing the screen from a distance of about 1.5 times the diagonal size.

Unfortunately, there is a lot of variation in how cameras use EXIF settings. If photos from your camera your produce unusable results, try coming back in a few days. I review submitted pictures regularly and try to fix problems.