Contrast ratio of BenQ GW2750

Contrast ratio 3337:1 (edge: 2710:1)
Monitor model BenQ GW2750
Submitted 18 Jun 2013 00:37 CEST, by 204.228.*.*
Camera model Canon PowerShot SX120 IS
Processing remarks


Black
Screen photo
Luminance 0.1 cd/m2
Luminance spread 0.08 cd/m2 (2 standard deviations)
Exposure value –2.41 stops   (aim for –2 to –3)
Exposure spread 1.29 stops
Area used for calculation 0.508 x 0.508
Camera settings Exposure time: 3.2   ISO: 400   F-number: 2.8
Focal length: 35.2 mm   (35 mm equivalent)
Exposure compensation: 0
White
Screen photo
Luminance 329 cd/m2
Luminance spread 34 cd/m2 (2 standard deviations)
Exposure value –1.35 stops   (aim for –2 to –3)
Exposure spread 0.15 stops
Area used for calculation 0.508 x 0.508
Camera settings Exposure time: 1/501   ISO: 400   F-number: 2.8
Focal length: 35.2 mm   (35 mm equivalent)
Exposure compensation: 0
Black at screen edge
Screen photo
Luminance 0.12 cd/m2
Luminance spread 0.08 cd/m2 (2 standard deviations)
Exposure value –2.11 stops   (aim for –2 to –3)
Exposure spread 0.94 stops
Area used for calculation 0.508 x 0.508
Camera settings Exposure time: 3.2   ISO: 400   F-number: 2.8
Focal length: 35.2 mm   (35 mm equivalent)
Exposure compensation: 0

The luminance values in cd/m2 are not very reliable, since camera sensitivities can easily differ up to 50% from their nominal value. Typically, the real luminance is 30% lower than this number. The area used for calculation is chosen such that it corresponds to a viewing angle of ±14° horizontally and ±10.5° vertically, which is equivalent to viewing the screen from a distance of about 1.5 times the diagonal size.

Unfortunately, there is a lot of variation in how cameras use EXIF settings. If photos from your camera your produce unusable results, try coming back in a few days. I review submitted pictures regularly and try to fix problems.