Contrast ratio | Test results | LCD test | Small-screen tests | Lagom home

Contrast ratio results

Contrast ratio 12678:1
Monitor model
Submitted 11 Nov 2018 00:45 CET, by 24.182.*.*
Camera model Google Pixel 2 XL
Processing remarks

Warning: image file 1: could not determine angle of view; assuming 38 mm lens (35 mm equivalent).
Warning: image file 1: automatic white balance can cause inaccuracies.
Warning: image file 1: Underexposed. Please increase the shutter time.
Note: image file 1: suggested exposure time: 35.6 s (Set EV to +6.9)
Warning: image file 2: could not determine angle of view; assuming 38 mm lens (35 mm equivalent).
Warning: image file 2: exposure time below 1/500 sec is unreliable. Try increasing the EV compensation.
Warning: image file 2: automatic white balance can cause inaccuracies.
Note: image file 2: suggested exposure time: 1/360 s (Set EV to +1.4)

Black
Screen photo
[open image]
Luminance 0 cd/m2
Luminance spread 0 cd/m2 (2 standard deviations)
Exposure value –9.39 stops   (aim for –2 to –3)
Exposure spread 0.53 stops
Area used for calculation 0.528 x 0.528
Camera settings Exposure time: 0.3   ISO: 400   F-number: 1.8
Focal length: 0 mm   (35 mm equivalent)
Exposure compensation: 0
White
Screen photo
[open image]
Luminance 44 cd/m2
Luminance spread 5 cd/m2 (2 standard deviations)
Exposure value –3.89 stops   (aim for –2 to –3)
Exposure spread 0.15 stops
Area used for calculation 0.528 x 0.528
Camera settings Exposure time: 1/936   ISO: 400   F-number: 1.8
Focal length: 0 mm   (35 mm equivalent)
Exposure compensation: 0

The luminance values in cd/m2 are not very reliable, since camera sensitivities can easily differ up to 50% from their nominal value. Typically, the real luminance is 30% lower than this number. The area used for calculation is chosen such that it corresponds to a viewing angle of ±14° horizontally and ±10.5° vertically, which is equivalent to viewing the screen from a distance of about 1.5 times the diagonal size.

Unfortunately, there is a lot of variation in how cameras use EXIF settings. If photos from your camera your produce unusable results, try coming back in a few days. I review submitted pictures regularly and try to fix problems.